Analysis of a new drug of abuse: Cathinone derivative 1‐(3,4‐dimethoxyphenyl)‐2‐(ethylamino)pentan‐1‐one

Recently, novel psychoactive drugs for human abuse such as amphetamines, phenethylamines, benzofuries, and tryptamines, cathinones have gained high popularity. These designer drugs are mainly sold via online stores as “bath salts” and are labeled “not for human consumption.” Due to the novelty of the compounds, only a little information about pharmacology, toxicology, and the long‐term damage they may cause is available. Moreover, there are only few analytical methods for their identification and analysis. Among new cathinone derivatives, 1‐(3,4‐dimethoxyphenyl)‐2‐(ethylamino)pentan‐1‐one (DL‐4662), became available via an internet shop. A sample of this compound was purchased and investigated. The first aim of our study was an identity check by NMR spectroscopy and gas chromatography with mass spectrometry. As many of the recreational drugs are chiral and are mainly sold as racemates, a further goal of our research was enantioseparation by gas chromatography with mass spectrometry and high‐performance liquid chromatography with UV detection, to prove whether DL‐4662 was traded enantiomerically pure or as racemic mixture. Both chiral separation methods showed the presence of a racemate.     

Adsorption of the anionic surfactant sodium dodecyl sulfate on a C18 column under micellar and high submicellar conditions in reversed‐phase liquid chromatography

Micellar liquid chromatography makes use of aqueous solutions or aqueous‐organic solutions containing a surfactant, at a concentration above its critical micelle concentration. In the mobile phase, the surfactant monomers aggregate to form micelles, whereas on the surface of the nonpolar alkyl‐bonded stationary phases they are significantly adsorbed. If the mobile phase contains a high concentration of organic solvent, micelles break down, and the amount of surfactant adsorbed on the stationary phase is reduced, giving rise to another chromatographic mode named high submicellar liquid chromatography. The presence of a thinner coating of surfactant enhances the selectivity and peak shape, especially for basic compounds. However, the risk of full desorption of surfactant is the main limitation in the high submicellar mode. This study examines the adsorption of the anionic surfactant sodium dodecyl sulfate under micellar and high submicellar conditions on a C₁₈ column, applying two methods. One of them uses a refractive index detector to obtain direct measurements of the adsorbed amount of sodium dodecyl sulfate, whereas the second method is based on the retention and peak shape for a set of cationic basic compounds that indirectly reveal the presence of adsorbed monomers of surfactant on the stationary phase.     

Development of a method to screen and isolate potential α‐glucosidase inhibitors from Panax japonicus C.A. Meyer by ultrafiltration,liquid chromatography,and counter‐current chromatography

A new assay based on ultrafiltration, liquid chromatography and mass spectrometry was developed for the rapid screening and identification of the ligands for α‐glucosidase from the extract of Panax japonicus. Six saponins were identified as α‐glucosidase inhibitors. Subsequently, the specific binding ligands, namely, notoginsenoside R₁, ginsenoside Rb₁, chikusetsusaponin V, chikusetsusaponin IV, chikusetsusaponin IVa, and ginsenoside Rd (the purities were 94.18, 95.43, 96.09, 93.26, 94.50, 93.86%, respectively) were separated by counter‐current chromatography using two‐phase solvent systems composed of tert‐butyl methyl ether, acetonitrile, 0.1% aqueous formic acid (3.8:1.0:4.4, v/v/v) and the solvent system composed of methylene chloride, isopropanol, methanol, 0.1% aqueous formic acid (5.8:1.0:6.0:2.2, v/v/v). The results demonstrate that ultrafiltration, liquid chromatography and mass spectrometry combined with high‐speed counter‐current chromatography might provide not only a powerful tool for screening and isolating α‐glucosidase inhibitors in complex samples but also a useful platform for discovering bioactive compounds for the prevention and treatment of diabetes mellitus.     

Determination of diflubenzuron and chlorbenzuron in fruits by combining acetonitrile‐based extraction with dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography

In this study, a simple and low‐organic‐solvent‐consuming method combining an acetonitrile‐partitioning extraction procedure followed by “quick, easy, cheap, effective, rugged and safe” cleanup with ionic‐liquid‐based dispersive liquid–liquid microextraction and high‐performance liquid chromatography with diode array detection was developed for the determination of diflubenzuron and chlorbenzuron in grapes and pears. Ionic‐liquid‐based dispersive liquid–liquid microextraction was performed using the ionic liquid 1‐hexyl‐3‐methylimidazolium hexafluorophosphate as the extractive solvent and acetonitrile extract as the dispersive solvent. The main factors influencing the efficiency of the dispersive liquid–liquid microextraction were evaluated, including the extractive solvent type and volume and the dispersive solvent volume. The validation parameters indicated the suitability of the method for routine analyses of benzoylurea insecticides in a large number of samples. The relative recoveries at three spiked levels ranged between 98.6 and 109.3% with relative standard deviations of less than 5.2%. The limit of detection was 0.005 mg/kg for the two insecticides. The proposed method was successfully used for the rapid determination of diflubenzuron and chlorbenzuron residues in real fruit samples.     

Reversed‐phase vortex‐assisted liquid–liquid microextraction: A new sample preparation method for the determination of amygdalin in oil and kernel samples

A novel, simple, and rapid reversed‐phase vortex‐assisted liquid–liquid microextraction coupled with high‐performance liquid chromatography has been introduced for the extraction, clean‐up, and preconcentration of amygdalin in oil and kernel samples. In this technique, deionized water was used as the extracting solvent. Unlike the reversed‐phase dispersive liquid–liquid microextraction, dispersive solvent was eliminated in the proposed method. Various parameters that affected the extraction efficiency, such as extracting solvent volume and its pH, vortex, and centrifuging times were evaluated and optimized. The calibration curve shows good linearity (r² = 0.9955) and precision (RSD < 5.2%) in the range of 0.07–20 μg/mL. The limit of detection and limit of quantitation were 0.02 and 0.07 μg/mL, respectively. The recoveries were in the range of 96.0–102.0% with relative standard deviation values ranging from 4.0 to 5.1%. Unlike the conventional extraction methods for plant extracts, no evaporative and re‐solubilizing operations were needed in the proposed technique.     

Ultrasound‐assisted emulsification microextraction coupled with high‐performance liquid chromatography for the simultaneous determination of fragrance allergens in cosmetics and water

A simple, inexpensive, and environmentally friendly method based on ultrasound‐assisted emulsification microextraction followed by solidification of floating organic drop and high‐performance liquid chromatography coupled to diode array detection was developed for the simultaneous determination of 18 potentially allergenic fragrance substances. Several parameters affecting the microextraction process were investigated in detail by the “one‐variable‐at‐a‐time” approach. Optimal conditions were the following: 50 μL of 2‐dodecanol as extraction solvent, 10 mL of sample containing 150 g/L of salt, and 5 min of sonication at 35°C. Under the optimized conditions, method showed good linearity in the selected ranges, with squared correlation coefficients ranging from 0.948 to 0.999. Limits of detection ranged from 0.001 to 0.154 μg/mL and enrichment factors from 9 to 237. Precision of the method, expressed as relative standard deviation, was checked at two levels obtaining good results (3.3–14.4%). Recovery studies were made in baby bath water and in eau de cologne showing acceptable accuracy. Finally, the developed method was successfully applied to different commercial cosmetic and water samples. The most commonly found analyte was linalool followed by cinnamal and lilial. Most of the analyzed samples contained at least one of the target compounds.     

High‐throughput salting‐out‐assisted liquid–liquid extraction for the simultaneous determination of atorvastatin,ortho‐hydroxyatorvastatin,and para‐hydroxyatorvastatin in human plasma using ultrafast liquid chromatography with tandem mass spectrometry

A high‐throughput, specific, and rapid liquid chromatography with tandem mass spectrometry method was established and validated for the simultaneous determination of atorvastatin and its two major metabolites, ortho‐hydroxyatorvastatin and para‐hydroxyatorvastatin, in human plasma. A simple salting‐out‐assisted liquid–liquid extraction using acetonitrile and a mass‐spectrometry‐friendly salt, ammonium acetate, was employed to extract the analytes from human plasma. A recovery of more than 81% for all analytes was achieved in 1 min extraction time. Chromatographic separation was performed on a Kinetex XB C₁₈ column utilizing a gradient elution starting with a 60% of water solution (1% formic acid), followed by increasing percentages of acetonitrile. Analytes were detected on a tandem mass spectrometer equipped with an electrospray ionization source that was operated in the positive mode, using the transitions of m/z 559.3 → m/z 440.2 for atorvastatin, and m/z 575.3 → m/z 440.2 for both ortho‐ and para‐hydroxyatorvastatin. Deuterium‐labeled compounds were used as the internal standards. The method was validated over the concentration ranges of 0.0200–15.0 ng/mL for atorvastatin and ortho‐hydroxyatorvastatin, and 0.0100–2.00 ng/mL for para‐hydroxyatorvastatin with acceptable accuracy and precision. It was then successfully applied in a bioequivalence study of atorvastatin.     

Separation of five compounds from leaves of Andrographis paniculata (Burm. f.) Nees by off‐line two‐dimensional high‐speed counter‐current chromatography combined with gradient and recycling elution

An off‐line two‐dimensional high‐speed counter‐current chromatography method combined with gradient and recycling elution mode was established to isolate terpenoids and flavones from the leaves of Andrographis paniculata (Burm. f.) Nees. By using the solvent systems composed of n‐hexane/ethyl acetate/methanol/water with different volume ratios, five compounds including roseooside, 5,4′‐dihydroxyflavonoid‐7‐O‐β‐d ‐pyranglucuronatebutylester, 7,8‐dimethoxy‐2′‐hydroxy‐5‐O‐β‐d ‐glucopyranosyloxyflavon, 14‐deoxyandrographiside, and andrographolide were successfully isolated. Purities of these isolated compounds were all over 95% as determined by high‐performance liquid chromatography. Their structures were identified by UV, mass spectrometry, and ¹H NMR spectroscopy. It has been demonstrated that the combination of off‐line two‐dimensional high‐speed counter‐current chromatography with different elution modes is an efficient technique to isolate compounds from complex natural product extracts.     

Preparation of a monolith functionalized with zinc oxide nanoparticles and its application in the enrichment of fluoroquinolone antibiotics

This study describes the enrichment ability of ZnO‐modified methacrylic acid‐co‐ethylene dimethacrylate polymer monoliths as stationary phases for the simultaneous determination of antibiotics (ofloxacin, ciprofloxacin, enoxacin, and pefloxacin) combined with high‐performance liquid chromatography. The prepared monolith was characterized by scanning electron microscopy, X‐ray photoelectron spectroscopy, Fourier‐transformed infrared spectroscopy, and thermogravimetric analysis. The polymer monolith microextraction method has been applied to the enrichment of fluoroquinolone antibiotics and satisfactory results were obtained in the analysis of water samples. Compared with the conventional methacrylic acid based monolith, the developed monolith exhibited a higher enrichment capacity because of the introduction of zinc oxide into the preparation process.     

Ionic liquid and aqueous two‐phase extraction based on salting‐out coupled with high‐performance liquid chromatography for the determination of seven rare ginsenosides in Xue‐Sai‐Tong injection

A method of ionic liquid salt aqueous two‐phase extraction coupled with high‐performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg₆, F₄, 20(S)‐Rg₃, 20(R)‐Rg₃, Rk₃, Rk₁, and Rg₅ in Xue‐Sai‐Tong injection. The injection was mixed with ionic liquid 1‐butyl‐3‐methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two‐phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue‐Sai‐Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.